Jackoboard Aqua Flat Shower Tray Board with Central Drain Position
The JACKOBOARD Aqua Flat range of low profile shower bases has been specifically designed to create wet rooms and walk-in showers in properties with suspended timber floors. However, you can also install the system in a solid floor if desired.
The JACKOBOARD Aqua Flat shower tray board system consists of a shower base and a drain unit. Both components are designed for each other and no other drain unit is compatible with the Aqua Flat board.
The shower tray board has a water-repellent core made of extruded polystyrene foam and an extremely low installation height with an incorporated drainage fall. They also feature a special coating on both sides that permits direct tiling without the need for additional preparatory work. The whole board is completely waterproof and stable - it is not affected by moisture, humidity or movement in the substrate.
To completely seal the installation area so it is totally waterproof it is highly recommended you use a sealing membrane kit such as the JACKOBOARD Wetroom Sealing Kit.
Shower Tray Board Features
- 100% waterproof construction
- Extremely low installation height
- With special coating on both sides
- Tiles can be applied directly
- Excellent thermal insulation properties (see the downloadable spec-sheet)
- Wheelchair-accessible
- Compressive strength > 300 kPa
- Sealed drain flange
- Central drain position
- Available in many sizes (see below)
- Optional drain covers available, including tile-able drain
Shower Tray Board Sizes (Width x Length x Depth)
- W 800 x L 800 x D 20mm
- W 900 x L 900 x D 20mm
- W 1000 x L 1000 x D 20mm
- W 1200 x L 900 x D 20mm
- W 1200 x L 1200 x D 20mm
- W 1500 x L 1500 x D 25mm
- W 1800 x L 900 x D 20mm
Suitable for
- Wood or concrete subfloor
- Tiled floor finish
- Use with wheelchairs (min 50mm sq tiles)
- Wet rooms
- Level access
- Raised on platform
- Underfloor heating
Not suitable for
- Vinyl floor finish
- Micro-cement
- Fitting direct on joists
The drain kit comes with the following:
- Clamping collar
- Clamping collar tool
- Grate Height extension insert
- Odour trap
- Backflow seal
- Grate support frame
- Solid stainless steel grate
-
Drain not included. Sold separately. See product options
Shower Tray Board Specifications
| Brand |
Jackoboard |
| Product Type |
Shower tray board |
| Shower Base Material |
Extruded polystyrene foam |
| Shower Base Shape |
Square & Rectangle
|
| Colour |
Grey with purple |
| Thickeness |
20 & 25mm |
| Waste type |
Square |
| Waste position |
Centre |
| Drain |
Horizontal |
| Drain grate material |
Stainless steel |
| Guarantee |
20 year manufacturer's guarantee |
Additional Information
- Jackoboard Aqua shower boards are not self-supporting. In order to support the base firmly when creating a level-entry design on a suspended timber floor a sub-floor must be constructed between the joists using, for example, 18mm plywood.
- Trimmable by 50mm off each edge
- To fit the drain body under the floor the centre point of the drain must be at least 90mm from any floor joists.
