Ardex P10 SR Crack Repair Resin Kit

Ardex P10 SR Crack Repair Resin Kit

ARDEX P10 SR Rapid Hardening Crack Repair Resin Kit is a solvent free polymer modified 2 component silicate resin system. The kit is easy to use and includes stitching pins, mixing/dosing bottles and protective gloves. It can be used for the rapid repair of non-structural cracks, joint sealing and as a rapid hardening general-purpose adhesive.

Crack Repair Resin Kit Features

• Easy to use, no mixing equipment required
• Fast setting and load bearing in as little as 20 minutes
• Each 600ml kit will repair approximately 4 linear meters
• Full kit provided for the stitch repair of cracks and joints
• Low viscosity with high penetrating capabilities
• Odourless and low emission
• Can also be used as an adhesive to fix metal profiles, carpet grippers etc.

Crack Repair Resin Kit Contains

• 2 x 300ml plastic mixing/dosing bottles
• 20 x metal stitching pins
• 1 x pair of protective gloves

Directions for use: Clean the area where the product is to be applied. Open up the cracks by cutting to 2/3 thickness of the substrate (note: check for the presence of electrical, heating or plumbing services before cutting). Where stitching is required, cut slots at right angles across the crack suitable to insert the metal stitching pins, at approximately 20cm intervals. Remove all the dust and debris from the crack and cut slots. Where stitching is required insert the stitching pins into the cut slots.

Wearing the protective gloves provided, pour Component B in to the plastic bottle of Component A and shake vigorously for approximately 15 seconds ensuring a homogenous yellow mix is achieved. (For partial quantities, the components must be mixed 1:1 by volume).

After mixing, cut the end of the pouring spout, on the bottle to open it. Within the products 10 minute working time, pour the ARDEX P 10 SR into the cracks and stitching slots, where stitching is required, ensuring they are filled. Remove any excess material immediately. For further instruction see product technical data section below.

Coverage: Each 600ml kit will repair approximately 4 linear meters - depending upon the depth/width of crack to be repaired.

Storage: Must be stored in unopened packaging above 10°C, in dry frost-free conditions.

Shelf life: Approx 12 months.